Anaerobic Range

You are here: Home » Engineering Adhesives » Anaerobic Range

Scotch-Weld Adhesives – Gaskets, Sealers & Compounds.

Reference	Image	Product Guide	Size Range	Product Info
GM74		Multi purpose Gasket Maker of “orange appearance”. Produces rapid seals on dissimilar rigid metals. Replaces traditional pre-cut gaskets and fills scratches and gouches. Use for gear-box casings or pump housings. Typical part-cure: 20min	from 50ml
HP42		“Brown appearance”. Designed to lock fine threads up to 15mm in hydraulic and pneumatic pipes. The seal locks & prevents material loosening from vibration or leakage. Typical part-cure: 15min	from 50ml
PS77		A single component, medium – high viscosity pipe sealant. “Flourescent yellow in appearance”. This is thixotropic which cures speedily on steel pipes. Locks and seals straight or tapered pipe threads. Designed to disassemble joints for servicing. Typical part-cure: 15 min	from 50ml
RT01		“Of green appearance”. Low viscosity retainer compound suitable for tight tolerances. It’s ideal for cylindrical components such as shafts and gives high strength bonds. Adhesive acts as a lubricant when assembling parts together. Typical part-cure: 15min	from 10ml
RT38		Maximum strength and thicker version retainer beneficial for slip fit assemblies. “Green Appearance”. Good for mounting pulleys, cams etc onto curved shapes. Typical part-cure: >15min	from 10ml
RT41		“Yellow/brown appearance”. This retainer gives a medium strength bond onto curved / cylindrical parts and components. The bond strength permits the disassembly of parts for servicing / replacing. Typical part-cure: 15min	from 10ml
TL22		This Threadlocker of “purple appearance” is made for smaller deep turned threads. Resists leaks and vibrations and allows for frequent disassmbly of parts. Formulated for softer metals such as brass. Typical part-cure: <15min	from 10ml
TL42		Medium strength screwlocker of “blue appearance” used for general purpose work on medium to larger threads in bolts and nuts. Disassembly possible with use of hand tools. Typical part-cure: <15min	from 10ml
TL43		As TL42 with “blue appearance” with more rapid cure. Able to cope with very mild contaminated oily surfaces and still give a good bond. Typical part-cure: 10min	from 10ml
TL70		Of “Green appearance” A studlock adhesive designed for bolts and studs of up to 1″ (25mm) with excellent vibration resistance and leakage through the threads. Suitable for water -pumps or parts in contact with water. Typical part-cure: <15min	from 10ml
TL90		Of “light green appearance”. A low viscosity adhesive that can penetrate pre-assembled fasteners and porosity sealing of welds. Good for carburetor adjustment screws particularly. Typical part-cure: <15min	from 50ml

		RoHS & REACH Compliant.
		Link here for more about RoHS & REACh

Contact us on 0117 971 1111 or 029 2046 2644 to place your orders or enquiries or to email us.

back to top