Cyanoacrylate Range

You are here: Home » Products » Adhesives » Engineering Adhesives » Cyanoacrylate Range

Scotch-Weld Adhesives – Multi-purpose and instant dry!

Reference	Image	Product Guide	Size Range	Product Info
EC100		General purpose medium setting and low viscosity instant adhesive. Clear in colour, use for general industry inc metal fabrication, maintenence and repair. Typical part-cure: 10 – 40 sec.	from 50gm
EC1500		A clear high viscosity ethyl cyanoacrylate based adhesive. High strength, multi-purpose bonding of most plastics, rubbers and metals. Suitable for use on porous substrates. Typical part-cure: 20 – 60 sec.	from 50gm
EC2500		Extra high viscosity instant adhesive that’s ideally suited for applying vertically to substrates. Good for porous / rough surfaces and for gap fill where needed. Typical part-cure: 20-60sec.	from 50gm
PR5		With little viscosity, this clear adhesive is designed to act fast giving optimum performance. Instantly bonds on rubbers and plastics. Typical part-cure: 1-10sec	from 20gm
PR20		Very low viscosity clear ethyl cyanoacrylate version specially formulated for sticking most plastics and rubbers. Will also bond other common substrates. Can be post-applied to pre-assembled parts. Typical part-cure: 2-20sec.	from 20gm
PR40		Low viscosity clear adhesive developed for difficult rubbers and plastics to give maximum performance. Typical part-cure: 3-20sec.	from 20gm
PR100		Medium viscosity fast cure clear adhesive with high strength. Developed for EPDM’s and other elastomers especially plasticized pvc’s. Typical part-cure: 10-30sec.	from 20gm
RT300Bx		Plastic & Rubber toughened adhesive of medium viscosity with fast cure properties. Black in colour it’s formulated with polymers that maximizes impact, peel and thermal resistance. remaining flexible. Good for EPDM’s and flexible type substrates or disimilar materials. Typical part-cure: 20-50sec.	from 20gm
SF100		Rapid bonding and superior instant clear adhesive replacing previous TC01. Ideal where surfaces have reduced natural surface moisture. Can be used on close fitting parts such as ceramics, metals, plastics, leathers & rubbers.  Typical part-cure: 3-30sec.	from 20gm
SIGel		An instant high strength ‘superglue’ type adhesive which may be used for most materials inc metal, fabrics, cards & glass. The improved gel formulation is thixotropic but flows giving a uniform performance. Typical part-cure: 3-60sec.	from 5mg
SI100		A modified ethyl based product suitable for bonding many materials including those with porous / acidic surfaces. Ideal for closer fitting, smooth edge parts. Fast bonding on plastics, rubbers, metals, wood etc.  Typical part-cure: 3-20sec.	from 20mg
SI1500		A single part fast curing high viscosity where gap filling is required. High impact strength, needing less moisture to begin the cure process. Can be used on plastics, rubbers, metals, wood etc. Typical part-cure: 5-60sec.	from 50gm
XF100		A super fast cure speed adhesive that’s solvent-free. Good for porous and more difficult to bond substrates and in low humidity environments -sets clear. Easy to use, this product exhibits high tensile and shear strengths. Typical part-cure: <30sec.	from 20gm

		RoHS & REACH Compliant.
		Link here for more about RoHS & REACh

Contact us on 0117 971 1111 or 029 2046 2644 to place your orders or enquiries or to email us.

back to top

Products