For Outstanding Performance – Big or Small

There are 3 important base types available!

1. Epoxy gives high strength at elevated temperatures and good chemical resistance
2. Urethane cures quicker to facilitate where flexibility between dis-similar materials exist. Has great impact resistance.
3. Acrylic bonds a wide assortment of materials inc difficult plastics and oily metals. The beauty here is surface preparation is kept to a minimum but never can be ruled out.

One-Part Structurals are readily available including the necessary primers. Engineering structural kits save time because you only need to coat one surface with the primer, and the other with your chosen adhesive, and bring together.

Scotch-Weld EPX is the simple way to mix and dispense 2-part adhesives. There’s no need to measure by volume or weigh. Just twist the nozzle onto the cartridge, slip into the applicator bracket and you’re ready to go. No mixing, no fuss and no errors! It’s the full proof way in achieving excellent bonds on many materials from wood and plastics to glass and metals.

Click here to see our NEW EPX Adhesives Accessory Guide

Scotch-Weld Bulk is available for mixing manually. It’s designed for textured surfaces or where bulk re-inforcing needs of substrates are essential. You’ll achieve suitable consistencies to enable the task in hand. Material clamping may be necessary during the curing process at room temperatures.
Available in Epoxy or Urethane depending on the materials to be bonded.

Scotch-Weld Jet Weld Reactive requires a special applicator that heats and dispenses the polyurethane adhesive. Although a ONE-PART product, it gives you the cohesive strengths of 2-part solutions but irradicates the need to clamp or jig components together. You get complete latitude when combining substrates together because you can adjust and position before final compression and assembly. Once bonded, you just leave it to one side and the self-clamping feature ‘kicks in’ drawing the surfaces together and cures.
There’s even an optional pre-heater unit that warms the cartridges ready for use – really useful in high volume situations. Use on many materials from wood and plastics to glass or metals - but not polyolefins