Acrylic

3M Structural Acrylic Adhesives:

Acrylic adhesives achieve permanent, and high-strength bonding with materials including metals, woods, plastics and ceramics. The acrylic products offer a fast strength build up, good resistance to impact and have high overlap shear and peel strength.

Minimal surface preparation is needed and they are particularly durable to metals, woods and most plastic surfaces. Short work life results in a fast development to handling strength, they will also bond well and offer good impact to many metals and ceramics.


DP801 Scotch-Weld Acrylic Adhesive:

Suitable for: plastic bonding, also bonds metals, wood, GRP.

  • very fast curing with a set time of 2-4 minutes at room temperature
  • low odour
  • toughened acrylic adhesive giving high peel strength and excellent impact resistance


DP810 Scotch-Weld Acrylic Adhesive:

Suitable for: bonding most metals, ceramics, rubbers, plastics and wood with minimal surface preparation.

  • tough, durable bonds
  • minimal surface preparation needed
  • low-odour acrylic with excellent shear and peel strength


DP8005 Scotch-Weld Acrylic Adhesive:

Suitable for: bonding low surface energy plastics, including many grades of polypropylene, polyethylene, and TPO's.

  • ability to bond dissimilar substratese
  • solvent-free adhesive system
  • excellent water and humidity resistance


DP8010 Scotch-Weld Acrylic Adhesive:

Suitable for: bonding low surface energy plastics, including many grades of polypropylene, polyethylene, and TPO's.

  • ability to bond dissimilar substrates
  • room temperature cure
  • excellent water and humidity resistance



Unsure about which adhesive is suitable for your application? Then drop us an email at webenquiries@finecal.co.uk or call us on 0117 971 1111 and we can provide the most suitable adhesive for your application.


Our top selling Acrylic Adhesives:

DP8005 38ml 3M EPX Scotch Weld Adhesive | Single Tubes

DP8005 38ml 3M EPX Scotch Weld Adhesive | Single Tubes

2-part acrylic adhesive with outstanding performance on many low surface energy plastics. These include polypropylene, polyethylene and thermoplastic olefins even if they have limited pre-surface trea..
£22.63 Ex VAT: £18.86
DP810 400ml 3M EPX Scotchweld Adhesive

DP810 400ml 3M EPX Scotchweld Adhesive

2-part acrylic EPX similar to DP801 but with improved working life before curing takes hold. Contains little odour characterics. Mix ratio: 1:1. Colour: Green. Temperature range: -50ºC to +80ºC. Hand..
£460.57 Ex VAT: £383.81
DP810 50ml 3M EPX Scotch Weld Adhesive

DP810 50ml 3M EPX Scotch Weld Adhesive

2-part acrylic EPX similar to DP801 but with improved working life before curing takes hold. Contains little odour characteristics. 38ml size cartridge. Mix ratio: 1:1. Colour: Green. Temperature ran..
£199.99 Ex VAT: £166.66
DP8005 38ml 3M EPX Scotch Weld Adhesive | 12 Tubes

DP8005 38ml 3M EPX Scotch Weld Adhesive | 12 Tubes

2-part acrylic adhesive with outstanding performance on many low surface energy plastics. These include polypropylene, polyethylene and thermoplastic olefins even if they have limited pre-surface trea..
£236.85 Ex VAT: £197.38
DP8010 45ml 3M EPX Scotch Weld Adhesive

DP8010 45ml 3M EPX Scotch Weld Adhesive

2-part acrylic EPX toughened adhesive with exceptional holding power to low surface energy plastics. These include materials such as polypropylene. Improved longer working life (10 min) before the cur..
£269.80 Ex VAT: £224.83